How Long Does a Boiler Service Take?

Isn’t it always annoying when you must sacrifice a day, hanging around the house, waiting for an engineer who only shows up when you go outside for a few minutes? Do you dread the days when boiler servicing is something you have to do?

Well, it does not have to be that stressful. Most people do not know that the main reason this process is so tedious and time-consuming, is that they hire incompetent people.

Why not also read: 5 Ways to Get Your Boiler Ready for Winter

So, how long is it supposed to take? Conservative estimates put the time to service a boiler at 45 minutes to 1 hour when done properly by competent personnel. The basic part of servicing a boiler includes checking everything.

How Do Engineers Do It?

First, the engineer will start by doing a thorough check of all the components. They give priority to the components prone to breakdown. The engineer will clean the components during this check.

If it takes less than an hour to complete this job, you should be worried that the check is probably not very thorough. When the check is complete, the engineer can tell when any problems could occur later depending on the state of the boiler at the time that it is being checked.

The Importance of Proper Boiler Servicing

Efficiency is just one reason you need to have a boiler serviced. Faulty boilers are dangerous, hospitalizing 250 people each year. Usually, it is non-fire-related poisoning from carbon monoxide.

The servicing ensures that there are no leaks or issues that could put you and your family in danger. The servicing also picks up on issues that might turn ugly later. Efficient boilers also save energy bills. The benefits are worth the money and time you will spend.

Book a Good Boiler Company

The worst part about servicing days is that you must wait too long for the engineer to arrive. Besides, some other problems that could be fixed easily, if you take the time to look for a servicing company that has a strong reputation, might go unnoticed.

With a company that you can trust like boiler installation Nottingham, you will know for sure you are getting the best people working on your boiler. It is always essential to be sure you have a boiler you can rely on when you need it.

It is all about checking the details to know who you can trust with the job.

How Does Central Heating Work?

The central heating system is a combination of heat production, distribution, and transfer systems. Collectively, they create a circuit that efficiently heats all rooms they are connected to. You can control the temperature in the rooms through a thermostat. Simple enough, right?

Why not also read: Cost of Installing Central Heating

But how do the individual components work? Below is a detailed explanation of how the different components work individually and as part of the more extensive system.

Heat development

The first portion of the central heating system is where it creates heat. Heat is typically generated in the central heating boiler. However, there are numerous components and techniques used to produce enough heat. In all the different methods, the components heat a ‘heat carrier.’ In the case of central heating systems, the heat carrier is water.

The water is heated and spread from the heating system through a piping system that is connected to the rooms that are to be heated. The heated water and the cooled water are transported through the pipework. The pipework feeds the hot water into the radiators on one end. The water goes through the radiator and comes out the other end cooled. It is then transported back to the central heater for reheating, and the cycle continues.

Heat transfer

The central heating usually transfers the heat to radiators or other specific heating surfaces through the pipework as explained above. The radiators are heated with hot water and in turn, heat the rooms through radiation and convection.

Why not also read: How Much Does Central Heating Cost Per Hour?

You see, radiators are made to create simple air circulations around them. This means that the hot air closest to the radiator rises to the ceiling and the cooler air falls. This cycle eventually heats a room.

Temperature reduction

Without temperature regulation, a central heating system would heat your rooms to uncomfortable levels. As such, it is important to turn off or reduce room temperatures of the central heating when you are not around or when you are asleep. You can do this by adjusting the thermostat.

When reducing the temperatures, you should set the thermostat at 5 degrees Celsius below your normal temperatures. Do not drop the temperature by more than 5 degrees Celsius as it will not help you save on energy bills. This is because stronger cooling requires more energy to restore the temperatures to normal. The only time it makes sense to drop the temperature by more than 5 degrees Celsius is when you’ll be away for an extended period like during the holidays.

Benefits of central heating system

  • With a single heat source, the central heating system coupled with an efficient boiler provides more value in terms of energy savings in comparison to multiple heat sources
  • In the modern boilers, the combustion is blocked from indoor air. As such, the risk of sustaining carbon monoxide poisoning is reduced than if you were to use a normal fireplace.
  • Underfloor heating is a reality with boiler and heat transfer technology.

The above guide is a simplified explanation of how central heating systems work. Though technology has evolved, the basics are the same. And you can save on energy bills by increasing the efficiency of the system or reducing the temperature requirements when you don’t need it.

Cost of Installing Central Heating

Have you bought a house that has an old boiler system? Or is your current boiler breaking down a little too often and costing you a fortune in repairs? If so, you should consider installing a new boiler system. Though the initial cost is huge, it helps you save on energy bills in the long run. Actually, with the amount of money you save over the years, the new boiler installation will practically pay for itself.

With that said, before you get started on the boiler installation project, you need to have a rough estimate of the costs to expect. In this guide, we shall share some crucial pointers to help you better plan your finances.

The cost of installing a new central heating system

The installation can set you back between £3,000 and £4,000. The installation will include the boiler, the pipes, controls, and radiators. And depending on the type of boiler you choose for your home, you might also need a hot water storage tank and an expansion tank.

Now, the prices of these elements vary significantly between manufacturers. What’s more, you’ll have to factor in the labour costs. However, most installation companies include the labour of Gas safe engineers in the quotation.

To give you a clear picture of what to expect, we’ve come up with rough estimates for two-storey, three-bedroom houses. The prices listed below are based on a Gas Safe engineer who will charge about £200 daily plus £100 for an extra worker.

  • New boiler cost (including the supply and installation: £900 – £1,400
  • Nine radiators including the supply and installation: £1,000 – £1,200
  • Water tank including supply and installation: £150 – £200
  • Miscellaneous parts and labour: £150 – £200
  • Pipework including supply and installation: £800 – £1,000
  • Total cost: between £3,000 and £4,000

Bear in mind that the above is a rough estimate. For an accurate determination of central heating installation cost, you need to consider additional factors including;

  • Boiler brand, size and type
  • The size of the radiators
  • The heating control technology
  • The ease of installation. For instance, an empty house is quicker to install than an inhabited house

Yes, the initial cost is daunting. But remember, you’ll save money by swapping your oil or electric central heating system for a gas system. This is because gas prices are lower in comparison to oil and electric bills. Also, modern boilers (especially those using condensing technology are 90% more efficient than conventional central heating systems. This means that for every £1 spent to heat the house, you only lose 10p.

Moreover, you can increase the savings more by investing in insulation solutions for your home. There’s also the option of smart heating controls, which will help in tracking your energy usage in real-time. Some thermostats even provide you with control over house heating through your smartphone. This way, you can turn on the heat when you leave work to ensure you arrive to a comfortable home without having to leave the heat on the entire day.

And here is some good news; depending on your prevailing circumstances, you might qualify for a boiler installation grant. Check different installation companies for these opportunities. Even if you can afford to fund the installation, you could use with the help.

How Much Does Central Heating Cost Per Hour?

If you’ve just moved out, you are not sure of the costs that come with being independent. For instance, how much will your central heating system cost you every hour? Though most people don’t bother to find out, it’s essential that you do (especially if you want to operate within a strict budget and monitor your central heating system’s efficiency).

But the challenge is in the fact that the central heating costs vary depending on the size of the house, the method used to heat the house, the amount of insulation in the house, the temperatures outside, and the general location of your home. Other factors affecting the cost of central heating per hour include taxes applied. With all this in mind, let’s delve deeper and learn how you can approximate the amount of energy used by your boiler system in an hour.

How you can measure your central heating system’s heater

Generally, the easiest way to determine the amount of energy you consume is to calculate the kWh (kilowatt). To do this, note the numbers displayed on the meter before turning on the heater and note the numbers displayed right before you turn it off.

In the UK, electricity costs about 13p per kWh. This means that is the central heating system consumes 2kWh; you will pay 26p for that hour. On the other hand, you can take the energy cost from the previous month, and divide it by 30 days and 24 hours. This calculation will give you a rough estimate of how much you paid for every hour the central heating system was running.

Why not also read: How to Bleed the Heating System

The cost depends on how big the flat/house is. Generally, bigger homes cost a little more. The prices also depend on how long the heating has been running and at what temperature. It is because of this that individuals are encouraged to set the thermostat to the least comfortable temperature. Also, if you are away, set the thermostat to the lowest temperature it can go. If you are alone in a big house, focus the heat to the rooms you frequent

Choosing the best heating fuel

You have several options to try. These include solar, oil natural gas, wood, and electricity. In this piece, we shall compare the gas and electricity options in detail. Overall, central electric heating is a little cheaper to install and also easy to maintain.

Natural gas’s initial cost is high. And worse still, it has many maintenance requirements. On the flip side, electricity is expensive in comparison to gas per kWt. Gas can cost about a third of the price of electricity costs. And last but not least, electricity systems take a while to warm up in comparison to gas systems.

So which among the two (electric and gas), is the best? Well, honestly, the two appear evenly matched. But, electric heating options are best for warm climates and in areas where gas isn’t readily available, and gas is best for cold climate. There’s also the option of using renewable energy like heat pumps, solar energy, and wind turbines. Renewable sources of energy save about 60 and 80% of regular heating needs. Also, its installation is higher than that of gas and electric heating.

Since the cost of energy varies depending on several factors, we cannot give a blanket cost. Instead, we advise that you calculate the energy consumed in an hour, as directed above.

5 Common Baxi Boiler Problems

At Boiler Installation Nottingham, we love guides! When it comes to boilers, it’s easy to be caught by surprise. Like other machines, boilers are prone to malfunctions and failing parts. Knowing what to expect with the different brands of boilers is critical in ensuring you are sufficiently prepared. Here are the five most common problems you’re likely to encounter when using a Baxi boiler.

  1. Low Boiler Pressure

Low boiler pressure affects every boiler brand in equal measure. It’s a simple problem to fix. But before you decide to fix it, it’s essential to check and ensure there are no underlying problems that could lead to the same problem again.

With low boiler pressure, you want to check if there are any leaks around the boiler. The leaks could be caused by a faulty seal, a defective pressure valve, or loose fittings. If there’s a leak, you need to have it fixed before topping up the boiler using the external filling loop.

It’s also possible that your boiler has been losing pressure over some time. It happens to all boilers. In this case, topping up and resetting the boiler will get it working again.

  1. Frozen Condensate Pipe

Baxi has come a long way. Now, they produce condensing boilers, all of which come with a condensate pipe. Because the pipe is outdoors, it’s prone to blocking and freezing. If the pipe is frozen, it can’t get dangerous fumes out of the house and as a safety precaution, the boiler will not start.

Luckily, all you need is a kettle of hot water to fix the problem. Heat water in a kettle and pour over the pipe to melt the ice. Once the flow is restored, the boiler will work properly again.

Got an Alpha Boiler? Check out our blog on 5 Common Alpha Boiler Problems.

  1. Broken Burner

If the burner is having a problem, you will hear loud noises inside the boiler. It’s hard to diagnose if the burner has a problem without the help of a qualified Engineer. You need to strip the boiler down to have a close look. If the boiler has a (128) fault code on the display panel, it’s a good hint the burner could be the problem.

Unfortunately, replacing the burner is expensive. If the boiler is old, it’s best to replace the entire boiler.

  1. Failed Ignition

If there’s an issue that could cause more damage to the boiler or pose a safety risk, the boiler will not ignite.

Some of the leading causes of failed boiler ignitions for a Baxi boiler are overheating, PCB problems, faulty fan or flue.

The solution depends on what you determine the problem to be. The flue problem is the easiest to correct. You can check for blockages or improper installation. For overheating and PCB problems, you need a professional to test the system and the sensor to figure out what the problem is.

  1. No Hot Water

Most of the time, a failing diverter valve is the reason why there’s no hot water coming from the taps. The diverter valve lets water into the heat exchanger. If it’s not working, no water is heated.

All you need to do is replace the diverter valve. Once it’s replaced, reset the boiler. You should have no problem accessing hot water from your taps now.

With these common problems and fixes, you’re better equipped to deal with any challenges that your Baxi boiler might throw your way. Don’t forget that having the boiler serviced annually will extend the life of the boiler and prevent some of these problems from happening.

Here a Boiler Installation Nottingham we provide Emergency Boiler Repairs so that you never have to worry.

5 Common Alpha Boilers Problems

At Boiler Installation Nottingham, we love guides! Most of the common problems that you will experience with Alpha boilers you can easily repair if you have the right tools and you can find your way around a boiler. The top five most common problems that you will experience with an Alpha boiler and the possible fixes include:

  1. Low Boiler Pressure

A low boiler pressure fault is indicated by an (E10) fault code on the display panel. The boiler will display the code when the pressure falls below 0.6bar.

Boilers are pressurised to make them more efficient. They might lose pressure over the years. When it goes below 1 bar, the boiler will indicate and eventually lockout to prevent further damage. A loss of boiler pressure could also be caused by a boiler leak.

If the pressure loss is spontaneous, try to locate the leak first. Once the leak is fixed, you can top up the boiler using the external filling loop. After topping up, you can reset the boiler to clear the fault code and start the boiler.

  1. No Hot Water Available

There are several reasons that could prevent the boiler from providing you with hot water. You need to run a series of tests to make sure you get to the bottom of the issue.

Check if there is power supply to the boiler and also if the fan is running before the boiler tries to ignite. Check if the boiler is firing up successfully and staying on.

Why not also read: 5 Common Ideal Boilers Problems

If all the above issues check out, the problem could be a faulty diverter valve. To confirm this, you can check if the heating is working fine. If it is, then the diverter valve needs to be replaced.

Need to diagnose a problem with your Ideal Boiler? Check out our latest blog.

  1. Lukewarm Water

Sometimes the boiler will provide you with lukewarm water on the hot water taps. It’s a problem that can happen with any boiler brand, but more likely to happen when you have an Alpha boiler.

A build-up of limescale or a faulty NTC thermistor could be the reason why you’re not getting hot water in your taps. If the NTC thermistor is defective, it sends the wrong information to your boiler, which can cause it to switch off before the water is hot enough. Electrical tests can verify this.

Deposits in the pipes causing blockages can also contribute to the problem. A power flush and replacing the thermistor should solve the problem.

  1. No Lights On The Boiler

Even when the boiler isn’t running, but the boiler is being supplied with power, there’s a light on the control panel. If there are no lights whatsoever on the interface, it’s clear there’s a problem with the power supply to the boiler.

Start by checking if other appliances around the house are working. Check the socket and the plug on the boiler to make sure they’re not the problem. If these check out as well, you might need to get a Gas Safe Engineer to diagnose the boiler and fix any issues.

  1. Loud Bangs From The Pipes

Loud noises in boilers are often a sign of kettling which happens when there’s limescale build-up. The boiling water inside the boiler is what makes it make noises like a kettle.

To clear the debris and limescale, you need to have a power flush done. You can also have a magnetic filter fitted that will help catch the debris and make it easier to remove.

You only need a handful of tools to fix most of these problems. But, never underestimate the essence of having the contact of a qualified Engineer at hand in case you realise you can’t handle the problem on your own.

Need a new boiler but struggling to afford it? Check out our Boiler Finance Scheme.

5 Common Ideal Boilers Problems

At Boiler Installation Nottingham, we love guides! Do you have an Ideal boiler? Or maybe you’re thinking of getting one and want to be on the lookout for any potential problems that you should be aware of? It’s a great approach to take. While the Ideal boiler brand is one to reckon with, like other boiler brands, there are specific problems that might befall the boiler. Here are the five most common and what you should do.

  1. Unresponsive Boiler

You might wake up to an unresponsive boiler. Despite all your efforts, you can’t get the boiler to fire up. As serious as the problem might sound, in most cases, it’s not. It’s often something as small as a wiring problem. That doesn’t mean you should run diagnostics to pinpoint the problem.

Try testing the socket using another appliance and also the plug to rule out a blown fuse. If these two check out, use a multimeter to check voltages in the circuit board.

If your wiring is working fine, you might check the PCB. It’s not easy to fix the PCB, so if it’s the source of the problem, you might have to replace it.

  1. Gurgling Noises

The Icos and Isar range of ideal boilers is the most often affected by this problem. As the boiler is working, you might hear some gurgling sounds. Usually, the sound is produced as a result of a blockage in the waterways from the boiler to the condensate pipes.

Deposits often build up in the pipework and restrict water flow, causing the weird sounds. To fix the problem, you have to strip the plate at the bottom of the boiler and remove the condensate trap to clear any blockages.

Need to fix your Worcester Bosch Boiler? Check out our blog.

  1. Loud Bangs on Ignitions

This is yet another problem that is common with Isar and Icos models. The loud bangs can cause quite the scare and rightfully so.

A boiler attempts to ignite three times before it goes into lockout. If it doesn’t light up in the first or second attempt, there’s a pile-up of gas inside the boiler. When it ignites on the third attempt, the concentration of gas causes a small explosion which is what sounds like a bang.

To fix the problem, you need to have the ignition leads and flame sensor replaced. Also, make sure you adjust the gas valve and check the fan speed.

  1. Leaking Boiler

A leaking boiler is always a concern no matter which brand you have. The boiler leaks are either caused by a loose part inside the boiler, a faulty seal or a blown pressure valve.

If the pressure valve is the problem, it has to be replaced. Be sure to check the boiler pressure to prevent another blowout. If the pump is loose, all you need to do is tighten it into place and that should stop the leak. If the seal is worn out, you can replace the seal. For old boilers, it’s recommended to change the entire pump.

  1. Ignition Failure

Boilers have a safety mechanism that prevents the boiler from starting up if there’s a problem with the boiler. The boiler will attempt to ignite three times. If it fails on all three occasions, it will simply lockout and fail to start.

There are various reasons that could cause a lockout. These include a faulty fan, a blockage in the flue, low pressure, among others. It’s best to have a Gas Safe Engineer come and give the boiler a look to determine the problem and fix it.

Some of these boiler problems are easy to fix. With some skills, tools and some boiler experience, you can quickly diagnose and fix the problem. But, if you’re unsure about anything no matter how simple, it’s best to have a qualified boiler engineer come and look at the boiler.

Bring warmth to your home this winter with our Central Heating Installations here at Boiler Installation Nottingham.

 

5 Common Worcester Boiler Problems

At Boiler Installation Nottingham, we love guides! No one likes the thought of waking up to no hot water or heating. But, it can happen even when you have the best boiler. Arming yourself with knowledge on some of the things that could go wrong with your boiler is critical. With the right tips and information, you can avert unnecessary inconvenience and even prevent more damage to the boiler.

If you have a Worcester boiler, these are the top five problems to expect and the possible fixes.

  1. Blocked Condensate Pipe

Worcester Bosch mainly has condensing boilers. That means the boiler will come with a condensate pipe that helps to get rid of harmful gases.

Because the condensate pipe is often outdoors, it has a high risk of blocking. The blockage could be a result of debris or freezing. Once the pipe is blocked, an EA229 fault code appears on the display panel.

The fix is, if the weather is not chilly, you need to check the pipe for obstructions. If there are any, removing them will restore normal boiler functions.

During winter, the cold weather can cause freezing inside the pipe. You have to thaw out the pipe by pouring hot water on it. This will clear the fault code. You can then restart the boiler normally.

  1. No Hot Water

There are several reasons you don’t have hot water. Before you can determine which one of them is affecting your boiler, you need to know if there are any other problems. Check if there’s heating, which taps don’t have hot water and if the cold water is working fine.

No heating and no hot water means the boiler is lacking power. Check the control panel for signs of power. If the lights are off and the control panel is blank, you need to check the connection, the boiler plug and the socket.

If heating is working, the diverter valve could be having problems. If it’s only the shower with the problem, check the mixing valve in the showerhead or the anti-scalding device and make sure both are in the correct settings.

Is your boiler leaking? check out our blog on How to bleed a heating system.

  1. Boiler Leak

Boiler leaks can cause low pressure, boiler lockout and if not repaired immediately, they can cause significant and costly damage to the boiler.

Boiler leaks often point to two problems. It could be a loose pump fitting or a worn-out seal. Seals degrade over time and the pump will get loose because of the vibrations in the boiler. For a loose pump, tightening it can stop the leak. If the seal is faulty, you will need to replace the seal.

If the boiler is old, it makes more sense to replace the entire pump, especially because the price difference isn’t much.

  1. Low Boiler Pressure

The boiler will lose pressure over time. The pressure loss is gradual. If this is the case, find the external filling loop and top up the boiler.

If the loss in pressure is spontaneous, the boiler has a leak. You need to have the leak fixed before you can attempt to refill the boiler and restart it.

  1. Banging Noises

The banging noises are often scary and concerning. An airlock in the central heating pump or kittling of the heat exchanger can cause loud noises.

Regardless of the cause behind the banging noises, you need a professional to come and look at the boiler. The bleed screw can help to remove the airlock. If the heat exchanger is at fault, it needs to be replaced.

When your Worcester boiler is facing any of these challenges, making the right decision can save you money, save the boiler more damage and ensure the boiler is back on its feet in the shortest time possible.

Looking for great boiler services Nottingham? Get in touch with us today!

How to Bleed the Heating System

Throughout the life of your boiler, you might have to bleed the radiators a couple of times. Bleeding the radiators helps to reduce pressure within the system and get the boiler working properly. Bleeding can also help to get the air out of the system can help to restore heat output. It may sound complicated, but it’s the opposite. It’s a simple procedure and when you follow the right steps, it’s relatively safe. If you’re faced with the challenge of bleeding your boiler and you don’t know what to do, this handy guide will walk you through each of the steps.

Pump up the System

To get the best results from bleeding the system, you need to tune the central heating into full settings and wait for the radiators to reach maximum heat. Because you will be working with the system when it’s hot, you have to be careful not to burn yourself. Once the radiators are up to speed, you need to feel around the radiators cautiously to feel if any parts of the radiators have cold spots. Cold spots indicate the presence of trapped air, which means you need to bleed the radiators with the cold spots.

Turn off the Heating

Once you know which radiators are having challenges, you need to turn off the heat before you start opening and turning things. You have to make sure the radiators have completely cooled.

Open the valve of the Heating System

In most modern boilers, you can open the valve using a screwdriver. If that’s not possible, you need to find the ‘bleed key.’ Your boiler comes with the bleed key and also a bleed valve which is what you’re supposed to open.

The bleed valve is a protrusion at the top of the heating system. Once you locate the valve and the bleed key, use the key to open the valve a couple of inches to let the unnecessary air to escape. Once the air starts escaping, you should hear a hissing sound. Bleed the valves until the hissing stops and water starts sipping out then you can close the valve. Have a cloth or a rug on the floor to catch any water that escapes from the radiator just to be on the safe side.

Is your boiler leaking? check out our blog on How To Fix A Leaking Boiler.

Reduce Overall Pressure

For homes with a sealed heating system, you have to reduce the overall pressure of the radiator. This helps to keep the volume of the water and the presence of the air at sustainable levels. If you have any problems, you can consult with the manual provided with your heating system.

Cleaning Up

Once the hissing sound stops, you can turn back the valve and make sure it’s tight. Now that the job is done, you have to clean up. If you had a cloth on the floor, it takes most of the cleaning work out of your hands. If not, you have to wipe any spills on the floor. Also, double-check to make sure all the valves are properly shut, so they don’t leak.

Moment of Truth

You have to check if the fix works by running the system. Once more, fire up the boiler and let the radiators heat up. Once they are nice and hot, feel around to see if there are any cold spots. If the fix worked, you shouldn’t feel any. If the problem persists, it might be time to call in an expert to identify what the problem is and have it fixed.

Need Boiler Repairs in Nottingham? Get in touch with us today!

How Often Should a Boiler be Replaced?

As professional boiler installers in Nottinghamshire, we get asked this question a lot. Boilers are the pride and joy of every home, especially during chilly Seasons. It’s imperative to make sure the boiler is in proper working condition to keep up with its demanding job. If you’ve had the boiler for some years, you must be wondering when you should have it replaced.

There are no set rules when it comes to how often the boiler needs to be replaced. The boiler can last for as long as 15 years or more if it’s a good quality boiler and have done an excellent job of keeping it in good shape.

The type of boiler and the service schedule are just some of the factors that will determine how long your boiler last. But, you should keep out an eye on the tell-tale signs of when your boiler needs to be replaced.

Does my boiler need replacing?

You don’t have to wait for your boiler to completely break down to replace. Before meeting its doom, there are signs the boiler will have indicating that its life is coming to an end. Identifying such signs will save you money in unnecessary repairs and the inconvenience of frequent cold showers.

Some of the signs that you need to replace your boiler include:

Your home is now the boiler engineer’s home

As your boiler grows older, it fails and breaks down more often. You will have constant visits from the boiler engineer as he tries to revive the boiler only for it to break down again after a few uses.

Compared to the cost of buying a new boiler, keeping on plugging holes in the old boiler is tempting and deceptively cheap.

But, if the boiler is more than 10 years old, you’re only postponing the inevitable and digging yourself deeper into financial misery. The repairs will only get more expensive not to mention you might be paying more for your energy bill.

If your boiler is losing pressure, read our latest blog post: What to do if your boiler is losing pressure.

Your heating bills are through the roof

Gas bills will steadily creep up as the boiler grows older and loses efficiency. You will save more on your energy bill by cutting ties with the old system and investing in a new one.

An inefficient boiler will use more energy and waste more heat. Energy consumption will only increase over the years and the efficiency will drop as low as 50%.

To protect yourself from bleeding money, consider buying a new boiler for your home. You’ll be happy you made the decision down the line.

The boiler has become smelly

As the boiler grows old, you will notice an unusual smell coming from the boiler. It’s not only a bad sign but one that could turn catastrophic.

The smell is a result of gas leaking and should be reported immediately to avert the risk of an explosion.

There’s also the risk of carbon monoxide poisoning. Unfortunately, because the gas is odourless, you will only notice the effects. You can install a detector close to the boiler to monitor carbon monoxide. If the sensor goes off, you should evacuate your home immediately and call the emergency number.

Unusual noises in the boiler

As the boiler grudgingly comes to the end of its life, it’s going to be cranky with lots of knocking, popping and hissing sounds.

Different components of the boiler will have a hard time working and keeping up with the demand around the house. The task at hand will no longer be as easy as it once was.

You can call the engineer to give the system a check and make sure everything is working properly. However, if this happens often, and the repair bill keeps going up with more expensive parts requiring replacement, you should consider having the system replaced.

Yellow flame

The flame that was once blue is now yellow! It could be caused by an overdue service but, you should call in a Gas Safe engineer who will tell you how serious the problem is and how best to solve it. For old boilers, more often than not, replacing the boiler will be easier.

It’s hard to get replacement parts

Boiler technology advances very fast. New parts and components with better technology and performances are regularly released and added into the new boiler. The ripple effect is that older parts become harder to find as the older boilers become obsolete.

If you have to wait a few days or weeks for the engineer to source for a replacement part, it’s probably best to embrace technology and go for a new boiler with readily available parts.

The boiler is out of touch with smart technology

Today, boilers can do all kinds of things thanks to technology. You can go as far as firing up your boiler when you leave work, so you find your home nice and toasty when you walk through the door.

Most homeowners will not dispose of their boiler just because it doesn’t keep up with modern trends but, those trends also come with additional benefits like convenience, better energy efficiency and ultimately, more savings for you.

If you notice any of these signs, it’s about time you had that boiler replaced. When selecting the new boiler, make sure you consider all the relevant factors, including how future-ready the boiler you’re picking is. This will allow you to delay the next boiler replacement and make the most out of your new boiler acquisition.